AUSLOG offer two cameras, which are as follows:
    1. Mighty Cam

    MIGHTY CAM is a complete miniature CCTV inspection system, designed for quick setup, and portability. Simply connect a power supply, with the reel and the system is ready for use. Borehole Television System. The system consists of a miniature waterproof COLOUR camera, hand wind and motor driven reels with optional cable lengths of 100, 150, 200, 250 and 300 metres and a high resolution combination Colour Monitor / Video Recorder or DVD Recorder or a Laptop with a video encoding attachment attached to the surface interface unit.

    Specifications

    Voltage 12 VDC  
    Current 2.5 A  
    Camera Electronic 380 + lines horizontal resolution, 0.2 lux @ F1.4 infrared & low light sensitive  
    Electronic Shutter 1/50 to 1/100 000 seconds  
    Automatic Gain Control 18 dB  
    Signal to noise ratio 50 dB  
    Std CCIR composite 75 ohm video output  
    Spectral Sensitivity 400 - 940 nm  
    12 Parallel lines of LED's 100 mA  
    Diameter 38 mm  
    Perspex front lens O-ring Sealed  
         


    Mightycam camera



    • 100, 150, 200, 250 or 300 m cable lengths
    • Colour
    • Operates on 12 Volts
    • 38mm Diameter
    • Portable and lightweight

    View Sample Mighty Cam Footage

    (Windows Media Player Required)

    2. AUSCAM Borehole Television System

    Click here for the Auscam flyer

    The AUSCAM operates on your four conductor logging cable, ideal for visual inspection of borehole logging:

    • Looking for blockages in water wells.
    • Geological inspection and logging.
    • Viewing sources of contamination.
    • Identifying damaged casings or screens.
    • Locating lost pumps or tools.
    • Inspecting encrustations.
    • Verifying the success of repairs and cleaning operations.
    • Assisting in the feasibility of rehabilitating old wells.


    Auscam is fitted with a standard four conductor tool head and can be used with your existing geophysical logging winches utilising four conductor cable. The video signal cannot be run without loss of picture quality through more than 500 metres of four conductor logging cable. The Auscam system is very simple to operate, consisting of the downhole camera and surface control omestic video recorder to complete the system and allow clear sharp colour images to be recorded to a depths of 300 metres, and Black and White images in excess of 500 metres.

    An audio input is also provided so the operator can record a voice commentary. A choice of either a high resolution Black & White or Colour CCD (digital) cameras are available, both are coupled to a wide-angle lens fitted with an automatic iris. Imposed onto the video image are depth measurement and hole identification, this is displayed on the monitor in real time, and may be recorded using an economical domestic video recorder in either NTSC or PAL format for play back at a later date.


Up | Down | Top | Bottom

     
  Auslog Pty Ltd
Unit 9, 29 Collinsvale St
Rocklea, QLD, 4106
Brisbane, Australia
Australian
Ph: 1300 306 481
Residents
Fax: 1300 306 482
Int. Ph: +61 7 3277 4671
Int. Fax: +61 7 3277 4672
e-mail: auslog@auslog.com.au
© 2005 Auslog Pty Ltd