The Magnetic Susceptibility/Induction Conductivity probe is designed for measurement of magnetic susceptibility and electrical conductivity of rocks in boreholes. High sensitivity, stability and wide dynamic range make it possible to carry on precise measurement of magnetic susceptibility and conductivity in metaliferious and sedimentary geology i.e. - sand - clay layers and ore zones. Thanks to the induction method the probe can be used in water filled, dry and plastic cased boreholes. The response of the probe is practically instantaneous (<0.5s)
EXTENDED RANGE
Magnetics
10-4 - 2 SI unit
suitable for strongly magnetic rocks where the standard would go out of range.
Conductivity
300mS/m to 1000S/m is suited to the examination of highly conductive metallic minerals and ores. Suitable for mineral exploration, mine development and planning.
Specifications
Tool Parameters
Measuring Parameters
Diameter 38mm Length 160cm Weight 6 kg Max. Working Temperature 70° C Max. Working Pressure 10 Mpa Min No. of Cable Conductor 1 Supply Voltage Range 22-32 VDC Maximum /Nominal current consumption 140/1000 mA DC
Magnetics Sensor two coil system Range 10-5 - 1 SI unit Intercoil spacing 15cm Accuracy 3% Communication Digital RS232
ConductivitySensor two coil system Range 1 - 3000mS/m Intercoil spacing 50cm Accuracy <100 mS/m - 5%
100-1000 mS/m - 3%
1000-3000 mS/m - 10%Communication Digital RS232