A029 Water Level Indicator

For the disconcerning Geologist, Drilling Contractor or Bore Operator the inexpensive, simple to operate, water level indicator will provide an accurate indication of the standing water level in a borehole. Audible and visible signals make the unit suitable for environments where direct sunlight or pump noise would normally make measurements difficult.

Record the water level by reading the graduations on the cable. On completion wind up the cable and store conveniently until next required.

When production is steady and the pumped water is declining slowly the condition of the bore is probably normal.

When production is declining and the water table is declining, nearby bores should be checked to establish the condition of the water table.

If production declines but the water is rising in the bore check the condition of the pump. During production if the water table is normal the bore may require development.

Features

  • Convenient and simple to use
  • Suitable for very small diameter bores or testing tubes of 10mm or more
  • Depth graduations are set at100mm with heavy mark 1m intervals
  • Visual and audio alarms are incorporated in the unit to allow for conditions of bright sunlight and noisy environments.
  • Sensor contacts are gold plated to reduce corrosion from fluid contact.
  • Includes self test feature for checking battery.
  • Case construction of high impact resistant plastic.



    Specifications

    Sensor Diameter8.5mm
    Sensor Weight40 grams
    Sensor Length130mm
    Cable Diameter3mm
    Unit Weight1.7Kg
    Battery Type9V
    Cable Length80m

    Auslog